3M™ Automix® Panel Bonding Adhesive, 08115, 6.8 fl. oz. (200 ml)-refinishx.com

3M™ Automix® Panel Bonding Adhesive is a two-part epoxy used to bond steel, aluminum, sheet molded compound (SMC), and fibreglass reinforced polyester (FRP). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. This adhesive provides extended work time but can be rapidly cured with heat. Use with 3M™ Premium Manual Applicator, 08117, and 3M™ Static Mixing Nozzle, 08193. \n \nThe 3M™ Panel Bonding Adhesive 08115 is ideal for replacing quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. This is a two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fibreglass). It is designed for use on outer body panels only, and is not appropriate for use on structural components such as pillars, frame rails, core supports, or rocker panels, on unibody vehicles. This adhesive cures on demand with addition of heat, and the glass beads work as built-in spacers for optimum bond line thickness. The 3M™ Panel Bonding Adhesive has corrosion inhibiting ability, and retains an excellent shelf life, either opened or unopened. Using this product helps to eliminate most overhead welding and heat warpage of sheet metal (associated with welding). Work time is two hours at 70°F (21°C) and one hour at 100°F (37°C). Handling time is four hours and cure time is 24 hours. There are two recommended applicator guns. They are the MixPac® Manual Applicator 08117 or the MixPac® eumatic Applicator 09930. 

Details 

• Two-part epoxy
  
• Extended work time
  
• Cures rapidly with heat
  
• Excellent adhesion to a wide variety of plastics and metals
  
• For use on outer body panels only
  
• Work time is two hours at 70°F (21°C) and one hour at 100°F (37°C)
  
• Handling time is four hours and cure time is 24 hours
  

Suggested Applications

• Used to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins
  
• Can be used for bumper cover repair under certain conditions
  
• Ideal for replacing quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins
  
• Quarter panels and box sides
  
• Bumper cover repair
  
• For use on outer body panels only
  
• Not for use on structural components such as pillars, frame rails, core supports, or rocker panels (on unibody vehicles)
  
• Two recommended applicator guns. They are the MixPac® Manual Applicator 08117 or the MixPac® Pneumatic Applicator 09930